X5PH MCU TS907 AC8227L ALPS Based Processor Headunit Firmware Guide

HMI TSKJ AC8227L ALPS Based Processor Headunits

The HMI TSKJ Headunit typically refers to a specific type of Human-Machine Interface (HMI) headunit used in vehicles, often associated with advanced infotainment systems. However, the term “TSKJ” isn’t widely recognized in mainstream automotive or electronics sources, so there may be some ambiguity about the exact product you’re referring to. I’ll cover the general aspects of HMI headunits and a few potential interpretations of the “TSKJ” branding.

• XPH-806B
• X5PH-V1.3
• MEKEDE U708 188L processor AC8227L (MTK8227L)

• XPH-806B-10.1TFT-V01

Specification

1. Kernel Version: 3.18.79
2. HMI: TSKJ.D.Q.F.3.C02.2019.11.08.08.30
3. MCU: TS907.190108(h)
4. MEDIA: HC_V2.0.0_190923_1100_e(v1.71)
5. BTV: BT.19.11.06.1230(c0:81:35:20:d1:a6 -my mac address for wifi/bt)

Software Features

• QUAD CORE ARM A7 4*1.2GHz (MT8227l)
• RAM: 2GB
• Flash: 16GB
• Operating System: Android 9.0(fake), Android 8.1 API 27
• Radio: FM/AM, RDS, DAB/DAB+(optional)
• GPS: Pre-loaded offline map data, support Google Maps/Waze online Navigation Support other Android navigation apps
• Screen: 7/9/10.1 inch
• Resolution: 1024*600
• Video Decoder: 1080P
• WIFI: Built-in
• Music Format: MP3, WMA, AAC, RM, FLAC, etc.
• Video Format: MPEG-1/2/4, H264, H263, VC1, RV, RMVB, DivX, Sorenson SparK, Spark, VP8, AVS Stream.
• FM Frequency Range: 87.5-108MHz; 0.05MHz(EU)/0.1MHz(USA)

Hardware Characteristics 

• Radio Module-7708
• Audio Processor-CSC37534
• DAC-PCM5100
• ULF-7388
• Communication Module-MT6625 LN

Motherboard:

Pre-Requisites:

1. Correct Firmware Version: Ensure that the firmware version is specifically designed for your headunit model (e.g., X5PH).
2. USB Drive or SD Card: Typically, firmware updates for headunits are done via a USB drive or SD card, so make sure you have one formatted with FAT32 or exFAT.
3. Backup Your Data: If applicable, back up any settings or personal data in the headunit before proceeding, as a firmware update can sometimes erase saved data.

General Overview

• The AC8227L is a powerful multimedia processor developed by ALPS (Alpine Electronics), designed to handle various tasks such as audio and video processing, user interface management, and connectivity features in automotive infotainment systems.

The 8227L Alps head unit is a car audio system that is commonly used in aftermarket car stereo installations. Alps, a well-known manufacturer of electronic components, produces a variety of head units for both OEM and aftermarket markets. The 8227L model is likely one of their more specific or earlier models. Here’s a general overview based on common characteristics of Alps head units:

Key Features (Common for Alps 8227L):

1. Audio Capabilities:

   • FM/AM Radio: Basic radio functions, allowing users to listen to local stations.
   • CD/MP3 Playback: Support for CD audio as well as MP3 file playback, offering versatility for media sources.
   • Auxiliary Input: Many of these units allow users to connect external devices via an auxiliary input, enabling playback from smartphones or other portable media players.
   • USB Port: Many Alps units come with a USB input to play music directly from flash drives or compatible devices.

2. Display:

   • LCD Screen: A typical feature of the 8227L would be an LCD display showing radio information, track details, and sometimes album art for connected media.

3. Connectivity:

   • Bluetooth: Some versions may include Bluetooth for hands-free calling and wireless audio streaming.
   • RCA Outputs: For connection to amplifiers or external subwoofers, allowing for a more robust sound system.

4. Control & Interface:

   • Simple Controls: The interface usually includes physical buttons for control, but may also have a knob for volume and menu navigation.
   • User-Friendly Interface: Generally designed to be easy to use, often with preset radio stations and customizable audio settings.
   • Equalizer: Adjustable equalizer settings to optimize sound according to preferences.

5. Installation and Compatibility:

   • DIN Size: Likely a standard 1-DIN unit, which fits in many car dash openings. This makes it compatible with a wide range of vehicles.

6. Additional Features:

   • CD Changer Compatibility: Some models might have the ability to connect to CD changers or other multimedia devices.
   • Equalization & Audio Settings: Detailed sound controls for bass, treble, and balance.

Usage:

• The Alps 8227L head unit would typically be used for improving the sound system in older vehicles or for those seeking to upgrade from stock factory head units. With simple controls and media input options, it provides a reliable and easy-to-use audio experience.

Technical Specifications

Core Architecture:

• Design: Likely follows a RISC-based architecture, which focuses on a small set of instructions to achieve high performance.
• Performance: Provides a balance between computational power and energy efficiency.

Clock Speed:

• Frequency: The specific clock speed of the 8227 variant would need to be referenced from technical datasheets or product specifications. However, RISC processors like those in the ZXDZ-01 series typically operate at moderate clock speeds, optimized for performance per watt.

Core Count:

• Core number: Information about the core count of the ZXDZ-01 8227 is not standard, but processors in the same class usually have multi-core designs, which can range from dual-core to four-core configurations

Cache:

• L1/L2 Cache: The processor may include L1 and L2 caches to speed up data transfer. The size and shape of these packages were tailored to the needs of the processor, improving overall performance.

Thermal Design Power (TDP):

• Power consumption: Designed with energy efficiency in mind, the TDP will match its functional and operational requirement

Applications

• Consumer electronics: Suitable for use on consumer devices including tablets, smartphones and smart home devices.
• Industrial Applications: It can be used in embedded systems and industrial control systems due to its performance and reliability.

Compatibility

• Operating Systems: The processor is designed to work with operating systems that support RISC architectures. It may be compatible with specific versions of Linux or custom OSes tailored to the processor’s capabilities.

Performance

•  It is optimized for applications that require a balance between performance and power efficiency.
• Performance benchmarks provide a clear picture of how the processor compares to similar models in this class.

Installing firmware on a ZXDZ-01 8227-based processor typically involves several steps. While specifics may vary depending on the specific configuration and firmware version, the following is a general guide to help you through the process. Always refer to the official documentation provided by the firmware manufacturer or vendor for specific instructions.

Stuck on Logo

If Headunit ZXDZ-01 stuck on the boot logo. It indicates the various factors arise from different types of issue may be its hardware can also from software.

Causes

Corrupted Firmware:

• Issue: During the firmware update process or a failed update can cause the device to get stuck on the boot logo.
• Solution: Try reinstall the firmware. 

Incompatible Firmware:

• Issue: Using firmware that is not compatible with your specific hardware version can lead to boot issues.
• Solution: Verify that the firmware version is correct for your ZXDZ-01 8227 processor. Check for the right version and compatibility.

Hardware Issues:

• Issue: Faulty hardware components, such as memory (RAM), storage, or the processor itself can prevent the device from booting properly..
• Solution: Inspect hardware connections and components. If possible, test with different hardware components or perform hardware diagnostics if the device supports it.

Power Supply Problems:

• Issue: An unstable or insufficient power supply can cause boot problems.
• Solution: Ensure that the power supply is stable and provides adequate power. Check power connections and replace any faulty power sources if necessary.

Boot Loader Issues:

• Issue: Problems with the boot loader can prevent the device from progressing beyond the boot logo.
• Solution: Reinstall or repair the boot loader if the device supports such recovery options.

File System Errors:

• Issue: Corruption in the file system or boot files can cause the boot process to hang.
• Solution: If possible, connect the storage device to another system to check and repair file system errors.

Software Conflicts:

• Issue: Software conflicts or issues with startup applications might cause the boot process to halt.
• Solution: Boot into safe mode or use recovery options to troubleshoot and resolve software conflicts.

Troubleshooting Steps

Power Cycle:

Unplug the device wait a few minutes, then turn it back on and do a complete power cycle.

Firmware Recovery:

If the device supports firmware recovery or has a recovery mode, use it to reapply or repair the firmware.

Contact Support:

If the above steps do not resolve the issue, contact our technical support team.

Firmware Installation Guide

Preparation

• Identify the Firmware Version: Ensure that you have the correct firmware version for your AC 8227 processor. Firmware updates are specific to the hardware version and should be downloaded from a given link.
• Backup Existing Firmware: If possible, back up the current firmware and any critical data on the device. This step is crucial to avoid data loss in case something goes wrong during the installation. You must know the memory dump proceddure. 
• Gather Required Tools: Depending on the installation method, you might need a USB drive for local update and MTK flash tool 

Firmware Installation

• Firmware file both with USB and Flash tool upload under the blog you can download as per your requirement.

Prepare the Installation Environment

• Boot Device: Ensure that the device running the AC8227 processor is powered off before beginning the installation.
• Access Method: Determine the installation method. This could be through a USB port, serial interface, or a dedicated firmware update interface. Refer to the device’s documentation for details.

Install Firmware

USB Method:

1. Copy Firmware to USB: Place the firmware file on a formatted USB drive (usually FAT32).
2. Connect USB Drive: Insert the USB drive into the appropriate USB port on the device. 
3. Goto Update Option: From Setting select local update 
4. Run Firmware Update: Use the device’s firmware update utility to select and apply the firmware file from the USB drive.

SPFT Installation Method:

Requirements:

1. Firmware File: Download the correct firmware for your headunit model
2. SP Flash Tool: Download and install SPflash tool into your computer
3. VCOM Drivers: Install the VCOM USB drivers
4. USB Cable: Use male to male USB cable to connect your head unit to the computer in 4Pin USB connector.

Firmwares Link:

Download – Via USB & Flash Tool firmware update

Download the firmware on known path of computer where you can find file destination easily. 

Install VCOM Drivers:

Download the VCOM USB drivers and install them. These drivers are necessary for the SP Flash Tool to recognize your device.

Download SP Flash Tool:

Download the SP Flash Tool from a reliable source and extract it to a known location on your computer.

Installation Process:

Launch SP Flash Tool

• Open the SP Flash Tool folder and run flash_tool.exe as an administrator.

Load Scatter File:

• Click on the “Choose” button in the SP Flash Tool next to the “Scatter-loading File” field.
• Navigate to the extracted firmware folder and select the MTXXXX_Android_scatter.txt file (where MTXXXX is the specific MediaTek chipset number, such as MT8227, etc.).

Prepare for Flashing:

• Ensure all the required files are loaded and selected in the SP Flash Tool.
• Make sure the “Download Only” option is selected and uncheck the preloaded.

Connect the Head Unit:

• Turnoff your headunit also disconnect from other power source. Connect headunit with the usb cable by using 4 pin connector.

Begin Flashing:

• Click the “Download” button in the SP Flash Tool.
• The SP Flash Tool will begin looking for your device. Once connected, the flashing process will start automatically.

Wait for Completion:

• Do not disconnect the device or interrupt the process until the flashing is complete. A green checkmark will appear indicating the process is successful.

Reboot the Head Unit:

• Disconnect the USB and then power on your headunit.
• Initially headunit take time then usual.

Complete Installation

• Verify Update: After installation, verify that the firmware has been updated successfully. This might involve checking version numbers through the device’s settings or running diagnostic tests.
• Reboot Device: Restart the device to ensure that the new firmware is loaded and functioning correctly.
• Restore Settings: If needed, reconfigure any settings that were reset or changed during the update process.

Post-Installation

• Test Functionality: Perform thorough testing to ensure that the device operates as expected with the new firmware. Check for any issues or lack of compatibility.
• Monitor Device: Keep an eye on the device for any unusual behavior that might indicate a problem with the firmware update.