A Simple Guide on the Procedure of How to Install Android Auto Head Unit in Your Car

A Practical Walk-Through, How to Install Android Auto Head Unit into Your Vehicle

Converting your car to an Android Auto head unit can however be of great advantage to your car and you as a driver. By the end of this guide, you will understand how to install an Android Auto head unit in your car, and do it right the first time.

What You Need

Before starting, gather all necessary tools and materials:Before starting, gather all necessary tools and materials:

• Android Auto head unit
• Car stereo removal tools
• Screwdrivers
• Wiring harness adapter
• Electrical tape
• Wire connectors
• Dash kit (if required)

Step 1: Workspace Preparation:

First of all, leave your car in a spot that is free from any danger and illuminated appropriately. It is recommended to also ground the negative terminal of your car battery to avoid any problems in terms of the electricity being used.

Step 2: Disconnect the wires and take out the current head unit and any other components inside:

With the car stereo removal tools that you used, physically detach the existing head unit from your car. This generally entails, the removal of the dashboard trim part and freeing the bolts of the mounting brackets. After the unit is loose, then disconnect the wiring harness and the antenna cable.

Step 3: Usually the wiring harness has a connector, fit that connector to the appropriate connection point on the fitting:

Align the wiring harness adapter to the wiring harness of your car. Each wire from the adapter should be connected to the relative wire in the Android Auto head unit. Screw the ends of the connection with wire connectors and then just cover the wire connectors with electrical tapes.

Step 4 – Install the Dash Kit:

If the new head unit demands a dash kit as well, then they ought to be installed strictly in conformity with the manufacturer’s conditions. This kit assist in making sure that the new head unit to be fitted in the car’s dashboard is properly fitted.

Step 5: Android Auto Head Unit Installation

Insert the Android Auto head unit into the factory dash kit or into the bracket for the head unit. Bolt it and make sure it is well fixed. Connect the wiring harness back and the antenna cable.

Step6: Installation implementation based on set objectives and goals.

Before putting all the dashboard components back, join the car battery’s negative terminal. Start the car, and then attempt to power on the Android Auto head unit. Do a complete run through of all features in the car, turning on audio systems, touched and making sure Android auto link is working perfectly. See that all is in proper order.

Step 7: Reassemble the Dashboard.

After you have made all the necessary changes for the perfect positioning of the preferred investment, you put back the dashboard trim. Check that all the panel or screws and anything else that holds the structure together is tightly in place.

Final Thoughts

While the prospect of getting Android Auto head unit for your car might sound like a hugely complicated task, it is far from impossible. Read this comprehensive tutorial on how to install an Android Auto head unit so you can bring the innovative features of automotive technology to your automobile.

Thank you for reading! If you found this blog helpful, be sure to explore more on our blogs where we regularly update with the latest insights and reviews on tech gadgets and firmware updates. Don’t forget to check out our Firmwares for the best selections of Android Auto car stereos and more.

If you have any other question as to related issues or extra information that you need, then feel free to leave a comment below or you can just contact us with any question you have regarding this blog. We are happy to help you regarding the most effective ways to use your technologies.